|
Securall® Hazardous Material Storage Buildings are designed for outdoor drum storage. Securall®'s quality cannot be beat with standard features such as corrosion-resistant, galvannealed steel construction, tornado and hurricane resistant walls, and interlocking wall panels designed for superior strength and durability.
Exterior Walls: 16-gauge (Models B200 - B1200)
or 12-gauge (Models B1600 - B8000) galvannealed steel -
Interior Walls: 20 gauge galvannealed steel (3" air space between walls)
-
Sump: 12 gauge steel liquid tight, continuously welded.
-
Forklift channel: urathane coated 12 gauge galvannealed steel
-
NFPA & OSHA Compliant Grounding: Static ground connection inside and out on all x rated models
-
Labeling: NFR warning label, Hazard Ratings System, Instructions
-
Venting: Natural convection vents
-
Explosion Relief Panels: 22 gauge steel opening protected by 9 gauge expanded steel
-
Available with 2 or 4 hour fire rating
-
Chemical, corrosive, ultraviolet and impact resistant paint
-
Removable galvanized steel safety floor planking
All models are FM approved, include UL listed electrical accessories, and are EPA and OSHA compliant.
Exclusively Securall®
Hurricane Rated & Tornado Resistant Walls
Securall® Buildings are hurricane rated and have been tested to determine the amount of force they can withstand and were shown to withstand F-4 tornado force winds of 250 mph. The chart below demonstrates the wind speed that a particular length of wall will resist.
Interlocking Wall Structure
Securall® Chemical Storage Buildings are designed using interlocking wall sections which provide superior strength and durability.
Exterior Wall Construction
Securall® Hazamat Storage Buildings are all-welded using 12 gauge (B1600-B8000 Models) and 16 gauge (B200-B1200 Models) galvannealed steel outer walls and 20 gauge cold rolled steel inner walls provide maximum durability, weather resistance, and rigidity..
Fire Rating - FM Approved Fire Rated Wall & Roof Design Tested at Intertek Testing Laboratory
(Check with your local authority having jurisdiction for correct wall/roof rating needed)
2 Hour Fire Rated wall construction built with 1.5 hour fire rated roof construction, 1.5 hour fire rated door construction, and 2 hr wall design. Air inlet vents with UL Listed and labeled fire damper with louvers. Dampers have a galvanized steel frame, curtain-type galvanized steel blades and a UL Listed 165° F fusible link.
4 Hour Fire Rated wall construction built with 3 hour fire rated roof construction, 3 hour fire rated door construction, and 4 hr wall design. Air inlet vents with UL Listed and labeled fire damper with louvers. Dampers have a galvanized steel frame, curtain-type galvanized steel blades and a UL Listed 165° F fusible link.
No Fire Rating : If a building is to be located more than 75 feet from a main buiding or property line, NO Fire Rating is required. (Please check with your local authority having jurisdiction for setback requirements).
Safety Floor Planking
 Slip resistant planking 13" wide, 12 gauge galvanized steel with raised perforated buttons and debossed holes protruding down. Galvanized steel floor planking above sump area for maximum corrosion resistance. Floor planking designed to sustain a minimum uniformly distributed load of 250 pounds per square foot. Floor planking and supports are removable to facilitate sump cleaning in the event of a spill.
Door Style
Door for B200-B400 Provide one (42" wide x 62.5”) and B600-B1200 Provide one (42” wide x 80”) high door to facilitate the unloading and loading of hazardous material within the building. Installed with a UL Classified commercial grade keyed lockset. The door shall serve as personnel entrance and exit.
Door for B1600-B8000 Provide one 60” wide x 80” high double door to facilitate the unloading and loading of hazardous material within the building. Installed with a UL Classified commercial grade keyed lockset. The double door shall have one active leaf to serve as personnel entrance and exit. The active leaf must be equipped with a door closer available on B600-B1200 fire rated models.
Explosion Relief Panels
Used in the construction of buildings designed for the storage and dispensing of Class IA and Class IB flammable liquids. Explosion relief panels limit the damage within an enclosed hazardous location. When the panel(s) are subjected to an explosive force, the pressure relieving panel quickly vents the force before it causes major damage. The panels are designed to release at 20 psf.
Securall® Fire-Rated Hazardous Material Storage Buildings (8'6"H x 42'W x 9'D Max Dimensions) carry the Factory Mutual System Approval label and are constructed based upon UL Fire Resistance Ratings classification criteria. In addition, all Fire-Rated Buildings come with hydraulic operated self-closing, fire-rated doors and fire damper protected vents.
Models Hazmat Buildings |
